Try New Firmware v2.2.0【closed】

Announcement
1

New firmware v2.2.0 is at preview.

  • Support Gcode Clustering at Lightburn, Provide smoother and faster image scanning
  • Hit frame protection at homing
  • Optimize stepper motor control code to eliminate jamming
  • Bug fix.

Support all NEJE 3/4/5 series devices.
Try it now.
Download firmware update pack at Here
NOTE!
The firmware upgrade package cannot use the application signature and may be mistaken for a virus. Please download it with confidence, the file is safe.
Bug Report
Creat a new post at Here or just send a e-mail to jack@neje99.com

1 Like
3

The new firmware has a bug in the new homing code. The head moves slightly forward and to the right. If the head was in position 0,0, this causes it to collide with the front of the machine. I think the head should go backwards and to the left (always feeling the endstop switches)

4

To avoid this behavior, change the parameters $130 (X Max Travel) to 730 and $131 (Y Max Travel) to 446

5

In fact, the best solution should be to return to the upper left corner (0, 440) instead of the lower left corner (0, 0) after the cutting task is completed, but it seems that everyone is used to returning to the lower left corner.

1 Like
7

The frame collision issue has been fixed. Please download the beta version software and then upgrade the firmware again.

8

This link is not working.

9

Thank you for your reminder. You don’t need to take the test here now. You can directly run the v6.6.0 Windows control software. It will remind you to upgrade the firmware to v2.2.0 after the connection is successful.

1 Like